JQ-AT600 Hospital Neurosurgery Ultra-low Medical Electro Hydraulic Operating Table
Accessories only include armboard and anesthesia screen frame.
|Left right angle
|Leg plate adjustment angle
|Head plate angle
|Waist bridge lifting distance
|One key zero
|One key V-type anti-v-type
|Dual controller system
|Power supply power
|Four point electric brake
1.The base of the electrohydraulic operating table,the lifting column housing,the bed, and the side rails aremade of high- quality 304 stainless steel and aluminum alloy,which are acid and alkaline resistant,corrosionresistant,and easy to clean.
2.Microcomputer control is adopted to realize one key reset,posture memory,functions,etc.
3.The electrohydraulic system is used to drive the operation of the bed table,including the bed table lifting,forward and backward tilt,left and right tilt,back plate lifting,horizontal movementhorizontal one buttonreset,braking,and dual controller system.
4. It is applicable to general surgery,neurosurgery, ENT,urology,obstetrics and gynecology,etc
5.Table size 2100 * 540mm;The lifting range is 540- 1040mm，the front and rear angles are 30°，and the left and right angles are 20°; Back plate lifting+80°- 40°; Head plate angle+60°- 90°;Leg plate (up/ down/extended) 15°/90°/180°; The bed surface can be moved 300 mm longi tudinally; Manual built-in renal bridge 0-120mm;
6.One key V-shaped and anti V- shaped angles can reach 220°/100°
7.Split air spring leg plate,easy to operate and hover at will.
8.The manual controller has 30 seconds automatic power off function without operation to prevent misoperation.
9.The maximum load is 250kg.