JQ-AT6800B3 High Quality Hospital Orthopedic Electric and Hydraulic Operating Table
include armboard and Anesthesia screen frame,not inlcude other accessories.
|Left and right tilt angle
|Leg plate adjustment angle
|Power supply power
|Dual controller system
|One key zero
|One key V-type anti-v-type
|Length of carbon fiber backplane
1.Electro hydraulic operating table,lifting,front and rear,left and right,back plate lifting,hori zontal translation，brake are all controlled by electrohydraulic.
2.The base,frame and side rails of the operating table are made of SUS304 stainless steel,which is convenient for disinfection and cleaning.
3.The dual controller system is composed of a wired hand controller and a bed auxiliary controller,which can be used independently wi thout interfering with each other.
4.The built- in backup battery can operate the operating table normally when the external power supply is dead.
5.Bed size: 2500 * 520mm; The table top rises and falls 700- 1050mm,and the maximum stroke is 350mm; Front and rear angle: 30°，
left and right angle: 20°; Back plate lifting+80° – 40°
Leg plate (up/ down/extended) 15°/90°/180°split air spring leg plate,easy to operate and hover at will.
The bed surface can be moved 300 mm longi tudinally.
6.The operating table has a one button reset function to facilitate the recovery of body position.
7.The carbon fiber backplane is free of any metal,which is convenient for the C- arm camera to shoot. The entire carbon fiber backplane is 1200mm long,and the single side of the perspective area after translation exceeds 1500mm.
8.Maximum load ≥350kg.